The FCM-P Self-Priming Residue Drainage Pump is a lightweight, self-priming pump, designed to operate both on surface and submerged. The pump casing is made of aluminum alloy and rubber, making it lightweight and wear-resistant. Supplied with a 5-meter suction hose and a cast iron suction plate that fits closely to the ground, it can draw water down to ground level. The side water inlet features a rubber check valve to prevent backflow after the pump stops operating. During operation, water enters through the suction plate, flows through the suction hose, motor housing, and the water jacket, and is discharged from the top, providing maximum cooling efficiency for the motor. The discharge outlet can be installed either horizontally or vertically.

Application

Civil engineering, building sites, basements or other utility

Pits, rainwater and  mud water

Specification

Water temperature: up to 40°C

PH: 6.5 to 8.5

Power supply: single phase 220V ± 10%, 50Hz, 60Hz

Insulation class: F

Protection class: IP68

Cable length: 6m

Max water depth: 10m

Special features on request

Other voltages